Custom Audio Designs Ltd 

Acoustic Absorbers | Sound Absorbers | Acoustic Panels | Absorption Tiles


Pyramid Profiled acoustic foam tilesPyramid Profiled acoustic foam tilesPyramid Profiled acoustic foam tilesPyramid Profiled acoustic foam tilesPyramid Profiled acoustic foam tiles

Pyramid Profiled Acoustic Foam

High noise levels are not only harmful to human hearing but important instructions and emergency warnings can go unheard in the general commotion of noisy buildings. It is a proven fact that noise reduces productivity in the workplace and results in lack of concentration, irritation and higher stress levels.

This problem is recognised and minimum acoustic standards are set out for builders and designers of existing and new buildings. Buildings should comply with the acoustic standards set out by the British Standards Institute (B.S.I.) and by the department for Education (D.F.E.E.). These tiles are also used in common hallways and corridoors to absorb reverberant noise, as required in Building Regulations Approved Document E, for residential flats.

These tiles provide a simple and effective means of markedly increasing the sound absorption within rooms and halls resulting in lower sound levels to comply with these regulations. They are easily glued with our clear web-spray adhesive to the ceiling or wall surfaces so no special tradesmen are required so installation costs are minimum. They can be easily cut with a sharp knife.

 Universal Acoustics - Profiled coustic foam tiles

Melamine foam is a unique, flexible, open cell foam, possessing a combination of low weight, a Class 0 fire specification and good sound absorption properties.


MELAMINE

Produced from melamine resins, Melamine foam exhibits superior fire, temperature and chemical resistance. Furthermore being halide free, Melamine foam when exposed to either naked flame or extreme heat does not emit any of the toxic bi-products associated with conventional polyurethane based acoustic foams.

Clean gloves should be worn when installing white melamine foam.

50mm Pyramid Profiled Melamine Foam
125Hz250Hz500Hz1kHz2kHz4kHzClassαw
0.100.250.600.750.850.95D0.55
70mm Pyramid Profiled Melamine Foam
125Hz250Hz500Hz1kHz2kHz4kHzClassαw
0.150.450.800.850.951.00C0.75
100mm Pyramid Profiled Melamine Foam
125Hz250Hz500Hz1kHz2kHz4kHzClassαw
0.300.801.001.001.001.00A1.00
SPECIFICATIONS
Colour:White (can also be sprayed using a fine mist coat of suitable paint)
Size:1200x600mm and 600x600mm per tile
Thickness:50mm, 70mm or 100mm
Weight:1.0kg/m²
Density:11Kg/m³
Flammability:Class0, non-flammable BS476
melatech acoustic foamDownload PDF

profiled pyramid melatech acoustic foam
School Classrooms


Saturn Pyramids - Profiled Sound Absorbing Acoustic Foam Tiles

Pyramids Pyramid Profiled Sound Absorbing Acoustic Foam Tiles 

50mm Pyramids

  • 600 x 600 x 50mm
  • Flammability: UL94 HF1
  • Available in: Purple, Charcoal or Burgundy.
  • 10 Tiles per box
  • Part Code: X121

They reduce standing waves and flutter echoes but ideally need to be used along with bass traps and other acoustic products if broadband absorption is to be achieved.

50mm Pyramids are a safe bet if you are trying to tame a room on a very low budget.


Pyramids Pyramid Profiled Sound Absorbing Acoustic Foam Tiles 

100mm Pyramids

Recommended for medium to large areas where better mid and low frequency absorption is required.

100mm Pyramids provide improved low end control over the 50mm version.

  • 600 x 600 x 100mm
  • Flammability: UL94 HF1
  • Available in: Purple, Charcoal or Burgundy.
  • 10 Tiles per box
  • Part Code: X122


All information contained in these details is given in good faith but without warranty.
Custom Audio Designs reserves the right to alter the specifications of any product without notice.
©Custom Audio Designs