Custom Audio Designs Ltd 

UKAS accredited ISO 9001

EcoTile | Sound Absorbers | Acoustic Panels | Absorption Tiles


ProSonic EcoTile Phonic - Class A Acoustic PanelsProSonic EcoTile Phonic - Class A Acoustic PanelsProSonic EcoTile Phonic - Class A Acoustic PanelsProSonic EcoTile Phonic - Class A Acoustic PanelsProSonic EcoTile Phonic - Class A Acoustic Panels

ProSonic EcoTile Phonic - Class A Acoustic Panel

ecotile-phonic-acoustic-panels

EcoTile Phonic acoustic panels are supplied as standard in an arctic white speckled paint finish on all 6 sides giving a crisp visually attractive appearance.

The panels can be fitted as individual stand-alone panels as a design feature or can be butted together to form continuous wall linings. The perimeter edges of the panels are square edged.

These panels are not designed for impact resistance so are best placed either at higher wall levels or used on the ceilings. On walls the panels can be fitted vertically or horizontally, usually above door level out of touching reach.

The smallest 1200x600mm panels can also be suspended vertically, along the thin edge, as baffles whilst all the panels can be installed horizontally as ceiling 'rafts' or 'clouds' using our wire fixing kits.

All panels are manufactured to dimensional tolerances of ± 3mm.

SPECIFICATIONS
Colour:White.
Size:2400x1200mm rectangle
1200x1200mm square
1200x600mm rectangle
1200mm diameter circle
800mm diameter circle
Fire Rating:Class 0
Weight:Approx. 4kg/m²
Thickness:40mm
Finish:Speckled paint.
ecotile-phonic-1

These panels can be emulsion spray painted on site to any colour with little significant effect on the acoustic performance. However, it is important that the paint is water based matt emulsion and only applied in a very light mist spray coat so that the acoustics are not significantly affected.

Installation

The panels can be fitted to walls with our spike fixings and optional adhesive.

For ceilings the panels can be suspended either vertically or horizontally using our fully adjustable wire suspension kits. For horizontal suspension the spiral hooks should be placed 200-300mm in from the panel edges.

We recommend using white cotton gloves when handling and installing this product so the surface is not marked.

Panels up to 1200x1200mm require 4 suspension wires, anything larger will require 6 suspension wires.

For walls, panels up to 1200x1200mm require 2 spikes, anything larger will require 4 spikes.

ecotile-phonic-wall-spike        ecotile-phonic-wire

Frequency125Hz250Hz500Hz1kHz2kHz4kHzαwClass
Surface Mounted0.250.750.951.001.001.001.00A
Vertical baffles spaced 600mm0.350.300.650.850.850.850.60C
ecotile-phonic



All information contained in these details is given in good faith but without warranty.
Custom Audio Designs reserves the right to alter the specifications of any product without notice.
©Custom Audio Designs