Custom Audio Designs Ltd
Independent Acoustics and Noise Control Expertise
 

Genie Clip | Recycled Acoustic Bracket | Acoustic Clip | Party Wall Floor Sound Insulation


Genie clip acoustic mountGenie clip acoustic mountGenie clip acoustic mountGenie clip acoustic mountGenie clip acoustic mount UK

USES:

  • Uprating party walls.
  • Can be used to meet New Building Regs.
  • Uprating ceiling acoustic ceilings.

BENEFITS:

  • Easy DIY Installation.
  • Minimum loss of room space.
  • Significant low frequency Improvements
genie clip image genie clip

Genie Clip has been specifically engineered to provide enhanced acoustic performance for the reduction of impact and airborne sound through wall and ceiling assemblies.

It is made from recycled components and engineered in a way which allows for a reduction in the overall assembled weight of traditional constructions.

Genie Clip is quick and easy to install with the proprietary furring channel. It is extremely stable when held in place with a single screw. The furring channel is simply clipped into the Genie Clip and the plasterboard can be immediately installed. Only one screw is required to install each clip.

genie clip installation
genie clip

genie clip

TECHNICAL DATA
Width41mm
Height24mm
Length63.5mm
Weight40g
Furring channel1200mm
Furring channel1850mm
acoustic flanking strip for perimeter isolation

This optional 45mm deep acoustic flanking strip is ideal for keeping the plasterboard from touching the floor/wall/ceiling. Any excess can be cut away before applying the acoustic sealant. In many instances it can be pulled out after the plasterboard adhesive has dried.

As a guide we advise that 2 clips and 2 linear metres of furring channel are required for each square meter of wall or ceiling that you are looking to cover. It is also worth getting a few extra clips and channels to allow for wastage.

ACOUSTIC TESTS
Stud Type15mm SoundblokTotal DepthInsulationGenie ClipRw (C;Ctr)Test No.
70mm metal2+2161mm50mm slabYes61 (-3;-9) dBL112-041
70mm metal1+2146mm50mm slabYes60 (-5;-12) dBL112-043
70mm metal2+2170mm50mm slabYes64 (-3;-9) dBL112-044
90mm metal2+1176mm100mm slabYes60 (-4;-11) dBTL07-619
90mm metal2+1176mm100mm slabNo46 (-2;-5) dBTL07-615
90mm metal2+2191mm100mm slabYes63 (-2;-8) dBTL07-618
90mm metal2+2150mm100mm slabNo48 (-2;-6) dBTL07-616
100mm timber2+1186mm100mm slabYes60 (-3;-9) dBTL07-672
100mm timber2+1186mm100mm slabNo39 (-2;-6) dBTL07-740
100mm timber2+2201mm100mm slabYes63 (-2;-7) dBTL07-670
100mm timber2+2201mm100mm slabNo42 (-3;-7) dBTL07-741
2x100mm staggered timber1+2195mm100mm rollNo44 (-1;-2) dBTL11-122
2x100mm double timber1+1255mm2x100mm slabNo61 (-3;-9) dBTL11-120
2x100mm double timber1+2270mm2x100mm slabNo64 (-2;-7) dBTL11-119
2x100mm double timber2+2285mm2x100mm slabNo65 (-2;-7) dBTL11-118


All information contained in these details is given in good faith but without warranty.
Custom Audio Designs reserves the right to alter the specifications of any product without notice.
©Custom Audio Designs