Anti vibration mounts | Isolators | Damping mounts | Vibration Isolators
VIBRATION ISOLATION MOUNTS
V Shaped Generator Mounts
The V-shaped Generator supports are comprised of two symmetrically-tilted metal parts with a screw on each side.
The DRD anti-vibration mounts offer great elasticity in the radial and axial directions.
The DSD mount offers great radial and axial elasticity. It is very suitable in the elastic suspension of machines that present vibrations of horizontal components.
The ATP mount is an elastic mount designed to provide anti vibration isolation for medium and high frequencies in any kind of machines (gen sets, motor pumps, compressors, hydraulic units etc).
The AT Mount is specifically designed to provide isolation for medium and high frequencies.
The SCB elastic mounts are elements that work on the basis of compression since thanks to their design and assembly they provide an anti-rebound effect, thus permitting safety assemblies.
SCH Mounts are made of two parts of rubber, one of which bears an inside metal bushing which acts as a guide through the machine anchoring screw.
The SPS Mount is comprised of an external cylindrical good and an inner tapering trunk. Two elastic elastomer parts located in the inside are sandwiched between the two metal parts.
Levelling Machine Mounts
The NF Type mounts are used in cases where light or heavy machines should not be fixed to the floor or ground.
©Custom Audio Designs