Acoustic Flanking strip | flanking strip | Acoustic flanking strip | acoustic edge isolation
ACOUSTIC FLANKING STRIP
It is essential when constructing acoustic walls floor or ceilings that the rigid boards do not come into contact with the existing structure. If they do then noise will be transferred at the junction.
Although it is possible to simply leaving a gap its far better to ensure there is no contact by using a resilient strip. Depending on the application, and design buildup, this strip can generally be used either way around although sometimes it may need to be trimmed away before the sealant is applied. It measures 20x45mm internally and should be used where:
Supplied in 2m lengths.
All information contained in these details is given in good faith but without warranty.